Showing 20 articles starting at article 1

Next 20 articles >

Categories: Chemistry: Thermodynamics, Energy: Alternative Fuels

Return to the site home page

     (via sciencedaily.com)     Original source 

To guide future research into solar geoengineering, an international group of scientists is making specific recommendations for evaluating proposals in order to identify the most feasible and legitimate scenarios for stratospheric aerosol intervention.

     (via sciencedaily.com)     Original source 

Researchers have developed a sprayable gel that creates a shield to protect buildings from wildfire damage. It lasts longer and is more effective than existing commercial options.

     (via sciencedaily.com)     Original source 

Your early morning run could soon help harvest enough electricity to power your wearable devices, thanks to new nanotechnology.

     (via sciencedaily.com)     Original source 

In the scorching heat of summer, anyone who spends time outside could benefit from a cooling fabric. While there are some textiles that reflect the sun's rays or wick heat away, current options require boutique fibers or complex manufacturing processes. But now, demonstrations of a durable chalk-based coating show it can cool the air underneath treated fabric by up to 8 degrees Fahrenheit.

     (via sciencedaily.com)     Original source 

Researchers have developed an eco-friendly refrigeration device with record-breaking cooling performance in the world, setting to transform industries reliant on cooling and reduce global energy use. With a boost in efficiency of over 48%, the new elastocaloric cooling technology opens a promising avenue for accelerating the commercialization of this disruptive technology and addressing the environmental challenges associated with traditional cooling systems.

     (via sciencedaily.com)     Original source 

A new model accurately represents the airflow around rotors, even under extreme conditions. The first comprehensive model of rotor aerodynamics could improve the way turbine blades and wind farms are designed and how wind turbines are controlled.

     (via sciencedaily.com)     Original source 

New fusion simulations of the inside of a tokamak reveal the ideal spot for a 'cave' with flowing liquid lithium is near the bottom by the center stack, as the evaporating metal particles should land in just the right spot to dissipate excess heat from the plasma.

     (via sciencedaily.com)     Original source 

Heat waves, droughts, and fires place growing stress on the West's electric grid. New research suggests that more integrated management of electricity resources across the region could significantly reduce the risk of power outages and accelerate the transition to clean energy.

     (via sciencedaily.com)     Original source 

Researchers developed a new method known as flash-within-flash Joule heating (FWF) that could transform the synthesis of high-quality solid-state materials, offering a cleaner, faster and more sustainable manufacturing process.

     (via sciencedaily.com)     Original source 

A groundbreaking technology has been unveiled that improves the efficiency of thermoelectric materials, which are key in converting waste heat into electricity, by altering their geometry to resemble an hourglass. Unlike previous research that solely depended on the material properties of thermoelectric substances, this new approach is expected to have widespread applications in thermoelectric power generation.

     (via sciencedaily.com)     Original source 

As global warming intensifies, people increasingly suffer from extreme heat. For those working in a high-temperature environment indoors or outdoors, keeping thermally comfortable becomes particularly crucial. A team has now developed thermally-insulated and breathable soft robotic clothing that can automatically adapt to changing ambient temperatures, thereby helping to ensure worker safety in hot environments.

     (via sciencedaily.com)     Original source 

More efficient and longer-lasting fuel cells are essential for fuel cell-powered heavy-duty hydrogen vehicles to be an alternative to combustion fuelled counterparts. Researchers have developed an innovative method to study and understand how parts of fuel cells degrade over time. This is an important step towards the improved performance of fuel cells and them becoming commercially successful.

     (via sciencedaily.com)     Original source 

Martian landers have been able capture measurements of wind speeds -- some gauging the cooling rate of heated materials when winds blow over them, others using cameras to image 'tell-tales' that blow in the wind -- but there's still room for improvement. Researchers now demonstrate a novel sonic anemometric system featuring a pair of narrow-band piezoelectric transducers to measure the travel time of sound pulses through Martian air. The study accounted for variables including transducer diffraction effects and wind direction.

     (via sciencedaily.com)     Original source 

Researchers have started to unravel the mysteries of how near-horizontal bowling in cricket leads to such tough-to-hit balls. The team employed a wake survey rake device made of multiple tubes designed to capture the pressure downstream of the ball and examined the flow dynamics of cricket balls rotating up to 2,500 rpm in a wind tunnel. The group found that low-pressure zones expanded and intensified near the ball when spinning, while these zones shifted and diminished downstream. At higher spin rates, the low-pressure zone begins to change to a persistent bilobed shape. The results lend support to the theory that these newer bowling techniques tap into the Magnus effect.

     (via sciencedaily.com)     Original source 

The movement of radiant heat -- felt when a hot surface warms our bodies and homes -- between buildings and their surroundings at ground level makes buildings with less skyward-facing surfaces harder to cool. A research team has demonstrated a new passive cooling technology that coats walls and windows with materials that can better manage heat movement between buildings and their surroundings at ground level. Findings could reduce the reliance on air conditioning and provide a more environmentally friendly, low-cost and scalable option for low-income communities with limited or no access to cooling and heating systems.

     (via sciencedaily.com)     Original source 

A research team has constructed an unprecedented chiral-structured interface in perovskite solar cells, which enhances the reliability and power conversion efficiency of this fast-advancing solar technology and accelerates its commercialization.

     (via sciencedaily.com)     Original source 

Researchers invented a technique that uses a specialized light projector and a photosensitive chemical additive to imprint two- and three-dimensional images inside any polymer. The light-based engraving remains in the polymer until heat or light are applied, which erases the image and makes it ready to use again. The technology is intended for any situation where having detailed, precise visual data in a compact and easily customizable format could be critical, such as planning surgeries and developing architectural designs.

     (via sciencedaily.com)     Original source 

Researchers found that how well light-converting molecules stack together in a solid is important for how well they convert light into electric current. A rigid molecule that stacked well showed excellent electricity generation in an organic solar cell and photocatalyst, easily outperforming a similar flexible molecule that did not stack well. This new way of improving the design of molecules could be used to pioneer the next generation of light-converting devices.

     (via sciencedaily.com)     Original source 

Heat and pressure can deteriorate the properties of piezoelectric materials that make state-of-the-art ultrasound and sonar technologies possible -- and fixing that damage has historically required disassembling devices and exposing the materials to even higher temperatures. Now researchers have developed a technique to restore those properties at room temperature, making it easier to repair these devices -- and paving the way for new ultrasound technologies.

     (via sciencedaily.com)     Original source 

Can plasma be sufficiently heated inside a tokamak using only microwaves? New research suggests it can! Eliminating the central ohmic heating coil normally used in tokamaks will free up much-needed space for a more compact, efficient spherical tokamak.