Showing 20 articles starting at article 261
< Previous 20 articles Next 20 articles >
Categories: Chemistry: Thermodynamics, Energy: Batteries
Published Energy-storing supercapacitor from cement, water, black carbon
(via sciencedaily.com) Engineers have created a 'supercapacitor' made of ancient, abundant materials, that can store large amounts of energy. Made of just cement, water, and carbon black (which resembles powdered charcoal), the device could form the basis for inexpensive systems that store intermittently renewable energy, such as solar or wind energy.
Published Way cool: 'freeze ray' technology
(via sciencedaily.com) An unusual discovery is now being developed as an on-demand cooling solution for high-flying military electronics.
Published Solar batteries: New material makes it possible to simultaneously absorb light and store energy
(via sciencedaily.com) Researchers are making progress on the design of a solar battery made from an abundant, non-toxic and easily synthesized material composed of 2D carbon nitride.
Published Fusion model hot off the wall
(via sciencedaily.com) Heat load mitigation is critical to extending the lifetime of future fusion device. Researchers have found a way to explain the rotational temperatures measured in three different experimental fusion devices in Japan and the United States. Their model evaluates the surface interactions and electron-proton collisions of hydrogen molecules.
Published Novel thermal sensor could help drive down the heat
(via sciencedaily.com) Excess heat from electronic or mechanical devices is a sign or cause of inefficient performance. In many cases, embedded sensors to monitor the flow of heat could help engineers alter device behavior or designs to improve their efficiency. For the first time, researchers exploit a novel thermoelectric phenomenon to build a thin sensor that can visualize heat flow in real time. The sensor could be built deep inside devices where other kinds of sensors are impractical. It is also quick, cheap and easy to manufacture using well-established methods.
Published Going the distance for better wireless charging
(via sciencedaily.com) Accounting for radiation loss is the key to efficient wireless power transfer over long distances.
Published Catalyst can control methane emissions in natural gas engines
(via sciencedaily.com) A catalyst using a single or just a few palladium atoms removed 90% of unburned methane from natural gas engine exhaust at low temperatures in a recent study. While more research needs to be done, the advance in single atom catalysis has the potential to lower exhaust emissions of methane, one of the worst greenhouse gases that traps heat at about 25 times the rate of carbon dioxide. Researchers showed that the single-atom catalyst was able to remove methane from engine exhaust at lower temperatures, less than 350 degrees Celsius (662 degrees Fahrenheit), while maintaining reaction stability at higher temperatures.
Published A non-covalent bonding experience
(via sciencedaily.com) Putting a suite of new materials synthesis and characterization methods to the test, a team of scientists has developed 14 organic-inorganic hybrid materials, seven of which are entirely new.
Published Aluminum materials show promising performance for safer, cheaper, more powerful batteries
(via sciencedaily.com) Researchers are using aluminum foil to create batteries with higher energy density and greater stability. The team's new battery system could enable electric vehicles to run longer on a single charge and would be cheaper to manufacture -- all while having a positive impact on the environment.
Published Current thinking on batteries overturned by cathode oxidation research
(via sciencedaily.com) Scientists have made a significant breakthrough in understanding and overcoming the challenges associated with Ni-rich cathode materials used in lithium-ion batteries.
Published Dry manufacturing process offers path to cleaner, more affordable high-energy EV batteries
(via sciencedaily.com) Early experiments have revealed significant benefits to a dry battery manufacturing process. This eliminates the use of toxic solvents while showing promise for delivering a battery that is durable, less weighed down by inactive elements and able to maintain high energy storage capacity after use. Such improvements could boost wider EV adoption, helping to reduce carbon emissions and achieve U.S. climate goals.
Published Droplet levitation is a new way to explore airborne viruses and microorganisms
(via sciencedaily.com) Researchers report achieving self-sustaining and long-term levitation of millimeter-sized droplets of several different liquids without any external forces. To get the droplets to levitate, they use solutocapillary convection, which occurs when a surface tension gradient is formed by nonuniform distribution of vapor molecules from the droplet at the pool surface. Further exploring the effects of various external conditions on self-sustained droplet levitation will reveal whether it can be harnessed and adapted for microbiology and biochemistry applications.
Published Small-winged and lighter colored butterflies likely to be at greatest threat from climate change
(via sciencedaily.com) Small-winged and lighter colored butterflies likely to be at greatest threat from climate change. The family, wing length and wing colour of tropical butterflies all influence their ability to withstand rising temperatures, say ecologists. The researchers believe this could help identify species whose survival is under threat from climate change.
Published Thermal cloak passively keeps electric vehicles cool in the summer and warm in the winter
(via sciencedaily.com) When an electric vehicle is parked outside, its temperature can swing wildly from day to night and season to season, which can lead to deterioration of the battery. To dampen these fluctuations and extend the battery's lifespan, researchers have designed an all-season thermal cloak that can cool an electric vehicle by 8°C on a hot day and warm it by 6.8°C at night. The cloak, made predominantly of silica and aluminum, can do so passively without outside energy input and operates without any modification between hot or cold weather.
Published The ground is deforming, and buildings aren't ready
(via sciencedaily.com) A new study has linked underground climate change to the shifting ground beneath urban areas. The phenomenon is affecting all major urban areas around the globe, causing civil structures and infrastructures to crack.
Published Next-generation flow battery design sets records
(via sciencedaily.com) A new flow battery design achieves long life and capacity for grid energy storage from renewable fuels.
Published New design rule for high-entropy superionic solid-state conductors
(via sciencedaily.com) Solid electrolytes with high lithium-ion conductivity can be designed for millimeter-thick battery electrodes by increasing the complexity of their composite superionic crystals, report researchers from Tokyo Tech. This new design rule enables the synthesis of high-entropy active materials while preserving their superionic conduction.
Published Sweat it out: Novel wearable biosensor for monitoring sweat electrolytes for use in healthcare and sports
(via sciencedaily.com) Wearable sensors are becoming a promising tool in personalized healthcare and exercise monitoring. In a recent study, researchers develop a novel wearable chemical sensor capable of measuring the concentration of chloride ions in sweat. By using a heat-transfer printing technique, the proposed sensor can be applied to the outer surface of common textiles to prevent skin irritation and allergies, and could also be useful in the early detection of heat stroke and dehydration.
Published Climate-friendly air conditioning inspired by termites
(via sciencedaily.com) The climate control used by termites in their mounds could inspire tomorrow's climate-smart buildings. New research shows that future buildings inspired by the termites could achieve the same effect as traditional climate control, but with greater energy efficiency and without its carbon dioxide footprint.
Published Researchers create highly conductive metallic gel for 3D printing
(via sciencedaily.com) Researchers have developed a metallic gel that is highly electrically conductive and can be used to print three-dimensional (3D) solid objects at room temperature.