Showing 20 articles starting at article 221
< Previous 20 articles Next 20 articles >
Categories: Chemistry: Thermodynamics, Engineering: Graphene
Published Fusion model hot off the wall
(via sciencedaily.com) Heat load mitigation is critical to extending the lifetime of future fusion device. Researchers have found a way to explain the rotational temperatures measured in three different experimental fusion devices in Japan and the United States. Their model evaluates the surface interactions and electron-proton collisions of hydrogen molecules.
Published Scientists caught Hofstadter's butterfly in one of the most ancient materials on Earth
(via sciencedaily.com) Researchers have revisited one of the most ancient materials on Earth -- graphite, and discovered new physics that has eluded the field for decades.
Published Washable, transparent, and flexible OLED with MXene nanotechnology?
(via sciencedaily.com) Transparent and flexible displays, which have received a lot of attention in various fields including automobile displays, bio-healthcare, military, and fashion, are in fact known to break easily when experiencing small deformations. To solve this problem, active research is being conducted on many transparent and flexible conductive materials such as carbon nanotubes, graphene, silver nanowires, and conductive polymers.
Published Novel thermal sensor could help drive down the heat
(via sciencedaily.com) Excess heat from electronic or mechanical devices is a sign or cause of inefficient performance. In many cases, embedded sensors to monitor the flow of heat could help engineers alter device behavior or designs to improve their efficiency. For the first time, researchers exploit a novel thermoelectric phenomenon to build a thin sensor that can visualize heat flow in real time. The sensor could be built deep inside devices where other kinds of sensors are impractical. It is also quick, cheap and easy to manufacture using well-established methods.
Published Catalyst can control methane emissions in natural gas engines
(via sciencedaily.com) A catalyst using a single or just a few palladium atoms removed 90% of unburned methane from natural gas engine exhaust at low temperatures in a recent study. While more research needs to be done, the advance in single atom catalysis has the potential to lower exhaust emissions of methane, one of the worst greenhouse gases that traps heat at about 25 times the rate of carbon dioxide. Researchers showed that the single-atom catalyst was able to remove methane from engine exhaust at lower temperatures, less than 350 degrees Celsius (662 degrees Fahrenheit), while maintaining reaction stability at higher temperatures.
Published A non-covalent bonding experience
(via sciencedaily.com) Putting a suite of new materials synthesis and characterization methods to the test, a team of scientists has developed 14 organic-inorganic hybrid materials, seven of which are entirely new.
Published Researchers put a new twist on graphite
(via sciencedaily.com) Original source Researchers report that it is possible to imbue graphite -- the bulk, 3D material found in No. 2 pencils -- with physical properties similar to graphite's 2D counterpart, graphene. Not only was this breakthrough unexpected, the team also believes its approach could be used to test whether similar types of bulk materials can also take on 2D-like properties. If so, 2D sheets won't be the only source for scientists to fuel technological revolutions. Bulk, 3D materials could be just as useful.
Published Droplet levitation is a new way to explore airborne viruses and microorganisms
(via sciencedaily.com) Researchers report achieving self-sustaining and long-term levitation of millimeter-sized droplets of several different liquids without any external forces. To get the droplets to levitate, they use solutocapillary convection, which occurs when a surface tension gradient is formed by nonuniform distribution of vapor molecules from the droplet at the pool surface. Further exploring the effects of various external conditions on self-sustained droplet levitation will reveal whether it can be harnessed and adapted for microbiology and biochemistry applications.
Published Small-winged and lighter colored butterflies likely to be at greatest threat from climate change
(via sciencedaily.com) Small-winged and lighter colored butterflies likely to be at greatest threat from climate change. The family, wing length and wing colour of tropical butterflies all influence their ability to withstand rising temperatures, say ecologists. The researchers believe this could help identify species whose survival is under threat from climate change.
Published Thermal cloak passively keeps electric vehicles cool in the summer and warm in the winter
(via sciencedaily.com) When an electric vehicle is parked outside, its temperature can swing wildly from day to night and season to season, which can lead to deterioration of the battery. To dampen these fluctuations and extend the battery's lifespan, researchers have designed an all-season thermal cloak that can cool an electric vehicle by 8°C on a hot day and warm it by 6.8°C at night. The cloak, made predominantly of silica and aluminum, can do so passively without outside energy input and operates without any modification between hot or cold weather.
Published The ground is deforming, and buildings aren't ready
(via sciencedaily.com) A new study has linked underground climate change to the shifting ground beneath urban areas. The phenomenon is affecting all major urban areas around the globe, causing civil structures and infrastructures to crack.
Published A bright future in eco-friendly light devices, just add dendrimers, cellulose, and graphene
(via sciencedaily.com) Original source Researchers have developed a light-emitting electrochemical cell using dendrimers, a material gaining popularity in the industry. Moreover, the team found that using biomass derived cellulose acetate as the electrolyte retains the cell's long-life span. Combined with a graphene electrode, the cell has the potential to light the way for a future of eco-friendly and flexible light-emitting devices.
Published Sweat it out: Novel wearable biosensor for monitoring sweat electrolytes for use in healthcare and sports
(via sciencedaily.com) Wearable sensors are becoming a promising tool in personalized healthcare and exercise monitoring. In a recent study, researchers develop a novel wearable chemical sensor capable of measuring the concentration of chloride ions in sweat. By using a heat-transfer printing technique, the proposed sensor can be applied to the outer surface of common textiles to prevent skin irritation and allergies, and could also be useful in the early detection of heat stroke and dehydration.
Published Climate-friendly air conditioning inspired by termites
(via sciencedaily.com) The climate control used by termites in their mounds could inspire tomorrow's climate-smart buildings. New research shows that future buildings inspired by the termites could achieve the same effect as traditional climate control, but with greater energy efficiency and without its carbon dioxide footprint.
Published Researchers create highly conductive metallic gel for 3D printing
(via sciencedaily.com) Researchers have developed a metallic gel that is highly electrically conductive and can be used to print three-dimensional (3D) solid objects at room temperature.
Published Scientists designed new enzyme using Antarctic bacteria and computer calculations
(via sciencedaily.com) For the first time, researchers have succeeded in predicting how to change the optimum temperature of an enzyme using large computer calculations. A cold-adapted enzyme from an Antarctic bacterium was used as a basis.
Published Soft, ultrathin photonic material cools down wearable electronic devices
(via sciencedaily.com) Original source Overheating of wearable skin-like electronic devices increases the risk of skin burning and results in performance degradation. A research team has now invented a photonic material-based 'soft, ultrathin, radiative-cooling interface' that greatly enhances heat dissipation in devices, with temperature drops more than 56°C, offering an alternative for effective thermal management in advanced wearable electronics.
Published 'Electronic skin' from bio-friendly materials can track human vital signs with ultrahigh precision
(via sciencedaily.com) Original source Researchers have used materials inspired by molecular gastronomy to create smart wearables that surpassed similar devices in terms of strain sensitivity. They integrated graphene into seaweed to create nanocomposite microcapsules for highly tunable and sustainable epidermal electronics. When assembled into networks, the tiny capsules can record muscular, breathing, pulse, and blood pressure measurements in real-time with ultrahigh precision.
Published Squid-inspired soft material is a switchable shield for light, heat, microwaves
(via sciencedaily.com) Original source With a flick of a switch, current technologies allow you to quickly change materials from being dark to light, or cold to hot, just by blocking or transmitting specific wavelengths. But now, inspired by squid skin, researchers report a soft film that can regulate its transparency across a large range of wavelengths -- visible, infrared and microwave -- simultaneously. They demonstrated the material in smart windows and in health monitoring and temperature management applications.
Published Inside-out heating and ambient wind could make direct air capture cheaper and more efficient
(via sciencedaily.com) Original source Chemical engineers use coated carbon fibers and eliminate steam-based heating in their simpler design, which also can be powered by wind energy.