Showing 20 articles starting at article 641
< Previous 20 articles Next 20 articles >
Categories: Chemistry: General, Engineering: Robotics Research
Published Unsafe lead levels in school drinking water: new study IDs building risk factors



Civil and environmental engineers have determined the factors that may help identify the schools and daycare centers at greatest risk for elevated levels of lead in drinking water. The most telling characteristic for schools in Massachusetts is building age, with facilities built in the 1960s and 1970s -- nearly a third of the facilities tested -- at the greatest risk for having dangerously high water lead levels.
Published Phasing out fossil fuels could save millions of lives



Scientists provide new evidence to motivate rapid fossil fuel phaseout. The science team determined exposure to ambient air pollution and its health impacts using an updated atmospheric composition model, a newly developed relative risk model and recent satellite-based fine particle data. They estimated all-cause and disease-specific mortality and attributed them to emission categories. They show that phasing out fossil fuels is a remarkably effective health-improving and life-saving intervention. About 5 million excess deaths per year globally could potentially be avoided.
Published Researchers develop novel deep learning-based detection system for autonomous vehicles



Autonomous vehicles require object detection systems to navigate traffic and avoid obstacles on the road. However, current detection methods often suffer from diminished detection capabilities due to bad weather, unstructured roads, or occlusion. Now, a team of researchers has developed a novel Internet-of-Things-enabled deep learning-based end-to-end 3D object detection system with improved detection capabilities even under unfavorable conditions. This study marks a significant step in autonomous vehicle object detection technology.
Published Durable plastic pollution easily, cleanly degrades with new catalyst



Found in fishing nets, carpet, clothing, Nylon-6 is a major contributor to plastic pollution, including ocean pollution. Now, chemists have developed a new catalyst that quickly, cleanly and completely breaks down Nylon-6 in a matter of minutes -- without generating harmful byproducts. Even better: The process does not require toxic solvents, expensive materials or extreme conditions, making it practical for everyday applications. In experiments, the new process recovered 99% of the polymer's building blocks, which can then be upcycled into higher-value products.
Published Blasts to clear World War II munitions could contaminate the ocean



World War II concluded decades ago, but live mines lurking on the ocean floor still pose threats, potentially spewing unexpected geysers or releasing contaminants into the water. Experts conduct controlled explosions to clear underwater munitions, but concerns have arisen over the environmental impacts from these blasts. New results show that the contamination produced by detonation depends on the blast type, with weaker explosions leaving behind more potentially toxic residues.
Published Artificial intelligence paves way for new medicines



Researchers have developed an AI model that can predict where a drug molecule can be chemically altered.
Published Greener solution powers new method for lithium-ion battery recycling



Used lithium-ion batteries from cell phones, laptops and a growing number of electric vehicles are piling up, but options for recycling them remain limited mostly to burning or chemically dissolving shredded batteries. Researchers have improved on approaches that dissolve the battery in a liquid solution in order to reduce the amount of hazardous chemicals used in the process. This simple, efficient and environmentally-friendly solution overcomes the main obstacles presented by previous approaches.
Published Nearly 400,000 new compounds added to open-access materials database



New technology often calls for new materials -- and with supercomputers and simulations, researchers don't have to wade through inefficient guesswork to invent them from scratch.
Published Network of robots can successfully monitor pipes using acoustic wave sensors



An inspection design method and procedure by which mobile robots can inspect large pipe structures has been demonstrated with the successful inspection of multiple defects on a three-meter long steel pipe using guided acoustic wave sensors.
Published How do you make a robot smarter? Program it to know what it doesn't know



Engineers have come up with a new way to teach robots to know when they don't know. The technique involves quantifying the fuzziness of human language and using that measurement to tell robots when to ask for further directions. Telling a robot to pick up a bowl from a table with only one bowl is fairly clear. But telling a robot to pick up a bowl when there are five bowls on the table generates a much higher degree of uncertainty -- and triggers the robot to ask for clarification.
Published Commitments needed to solve aviation's impact on our climate



Researchers could find no simple solution to limiting non-CO2 emissions from aircraft.
Published Researchers engineer a material that can perform different tasks depending on temperature



Researchers report that they have developed a new composite material designed to change behaviors depending on temperature in order to perform specific tasks. These materials are poised to be part of the next generation of autonomous robotics that will interact with the environment.
Published New method verifies carbon capture in concrete



Carbon capture is essential to reduce the impact of human carbon dioxide emissions on our climate. Researchers have developed a method to confirm whether carbon in concrete originates from the raw materials, or from carbon in the air which has been trapped when it reacts with the concrete to form the mineral calcium carbonate. By measuring the ratio of certain carbon isotopes in concrete that had been exposed to the air and concrete that hadn't, the team could successfully verify that direct air carbon capture had occurred. This method could be useful for the industrial sector and countries looking to offset their carbon emissions.
Published New method uses crowdsourced feedback to help train robots



A new technique enables an AI agent to be guided by data crowdsourced asynchronously from nonexpert human users as it learns to complete a task through reinforcement learning. The method trains the robot faster and better than other approaches.
Published Separating out signals recorded at the seafloor



Research shows that variations in pyrite sulfur isotopes may not represent the global processes that have made them such popular targets of analysis and interpretation. A new microanalysis approach helps to separate out signals that reveal the relative influence of microbes and that of local climate.
Published Chemists use oxygen, copper 'scissors' to make cheaper drug treatments possible



Researchers have devised a way to produce chemicals used in medicine and agriculture for a fraction of the usual cost. Using oxygen as a reagent and copper as a catalyst to break organic molecules' carbon-carbon bonds and convert them into amines, which are widely used in pharmaceuticals. Traditional metal catalysis uses expensive metals such as platinum, silver, gold and palladium, but the researchers used oxygen and copper -- an abundant base metal.
Published Autonomous excavator constructs a 6-meter-high dry-stone wall



Researchers taught an autonomous excavator to construct dry stone walls itself using boulders weighing several tons and demolition debris.
Published Hybrid transistors set stage for integration of biology and microelectronics



Researchers create transistors combining silicon with biological silk, using common microprocessor manufacturing methods. The silk protein can be easily modified with other chemical and biological molecules to change its properties, leading to circuits that respond to biology and the environment.
Published AI for perovskite solar cells: Key to better manufacturing



Tandem solar cells based on perovskite semiconductors convert sunlight to electricity more efficiently than conventional silicon solar cells. In order to make this technology ready for the market, further improvements with regard to stability and manufacturing processes are required. Researchers have succeeded in finding a way to predict the quality of the perovskite layers and consequently that of the resulting solar cells: Assisted by Machine Learning and new methods in Artificial Intelligence (AI), it is possible assess their quality from variations in light emission already in the manufacturing process.
Published New method for determining the water content of water-soluble compounds



Researchers have developed a new method for the accurate determination of the water content of water-soluble compounds. This plays a significant role in various areas, including determining drug dosages.