Showing 20 articles starting at article 61
< Previous 20 articles Next 20 articles >
Categories: Chemistry: Inorganic Chemistry, Engineering: Nanotechnology
Published Hair follicle models from the 3D printer
(via sciencedaily.com) Original source Hair follicle infections are often difficult to treat because bacteria settle in the gap between hair and skin, where it is difficult for active substances to reach them. In order to investigate this scenario more closely in the laboratory, researchers have now developed a model with human hair follicles embedded in a matrix produced using 3D printing. In the future, this model can be used to test the effectiveness of new drug candidates against corresponding pathogens directly on human follicles.
Published Plant-inspired polymers for water purification
(via sciencedaily.com) Original source Researchers have synthesized a bio-inspired polymer for water purification. The polymer was designed to mimic phytochelatin, a plant protein that selectively captures and neutralizes harmful heavy metal ions. The hyperconfinement of the polymer enabled a flow-through system and effectively removed cadmium ions from contaminated water, making it safe to drink. The system was selective for heavy metals and provides a new way to remove specific contaminants from water.
Published Scientists work to build 'wind-up' sensors
(via sciencedaily.com) Original source An international team of scientists has shown that twisted carbon nanotubes can store three times more energy per unit mass than advanced lithium-ion batteries. The finding may advance carbon nanotubes as a promising solution for storing energy in devices that need to be lightweight, compact, and safe, such as medical implants and sensors.
Published Pioneering measurement of the acidity of ionic liquids using Raman spectroscopy
(via sciencedaily.com) Original source A study has made it possible to estimate experimentally the energy required to transfer protons from water to ionic liquids.
Published 'Miracle' filter turns store-bought LEDs into spintronic devices
(via sciencedaily.com) Original source Scientists transformed existing optoelectronic devices into ones that can control electron spin at room temperature, without a ferromagnet or magnetic field. Researchers replaced the electrodes of store-bought LEDs with a patented spin filter made from hybrid organic-inorganic halide perovskite.
Published Researchers explore the interplay between high-affinity DNA and carbon nanotubes
(via sciencedaily.com) Original source Single-walled carbon nanotubes (SWCNTs) hold promise for biomedicine and nanoelectronics, yet the functionalization with single-stranded DNA (ssDNA) remains a challenge. Researchers using high-affinity ssDNA sequences identified through high-throughput selection. They demonstrated the effectivity and stability of these constructs using molecular dynamics simulations. Machine-learning models were used to accurately predict patterns that govern ssDNA-SWCNT binding affinity. These findings provide valuable insights into the interactions between ssDNA and SWCNTs.
Published A recipe for zero-emissions fuel: Soda cans, seawater, and caffeine
(via sciencedaily.com) Original source Engineers discovered that when the aluminum in soda cans is purified and mixed with seawater, the solution produces hydrogen -- which can power an engine or fuel cell without generating carbon emissions. The reaction can be sped up by adding caffeine.
Published Better way to produce green hydrogen
(via sciencedaily.com) Original source Researchers have developed a material that shows a remarkable ability to convert sunlight and water into clean energy.
Published Tackling industrial emissions begins at the chemical reaction
(via sciencedaily.com) Original source Researchers are proposing a new way to curb industrial emissions, by tapping into the 'atomic intelligence' of liquid metals to deliver greener and more sustainable chemical reactions.
Published Researchers discover faster, more energy-efficient way to manufacture an industrially important chemical
(via sciencedaily.com) Original source The reactivity of zirconium on silicon nitride enhances the conversion of propane into propylene, a key commodity chemical needed to make polypropylene. This finding hints at the reactivity researchers might achieve with other nontraditional catalysts.
Published Researchers develop innovative battery recycling method
(via sciencedaily.com) Original source A research team is tackling the environmental issue of efficiently recycling lithium ion batteries amid their increasing use.
Published Nanoscale device simultaneously steers and shifts frequency of optical light, pointing the way to future wireless communication channels
(via sciencedaily.com) Original source A tunable metasurface can control optical light in space and time, offering a path toward new ways of wirelessly and securely transmitting large amounts of data both on Earth and in space.
Published A new way to make element 116 opens the door to heavier atoms
(via sciencedaily.com) Original source Researchers have successfully made super-heavy element 116 using a beam of titanium-50. That milestone sets the team up to attempt making the heaviest element yet: 120.
Published Researchers develop more environmentally friendly and cost-effective method for soil remediation
(via sciencedaily.com) Original source Chemists have developed a rapid electrothermal mineralization (REM) process, which in seconds can remediate the accumulation of synthetic chemicals that can contaminate soil and the environment.
Published A promising new method uses light to clean up forever chemicals
(via sciencedaily.com) Original source A room-temperature method to decompose perfluoroalkyl substances (PFASs) using visible LED light offers a promising solution for sustainable fluorine recycling and PFAS treatment.
Published Team develops safe and long-cyclable lithium metal battery for high temperatures
(via sciencedaily.com) Original source In recent years, batteries have become ubiquitous in consumers' daily lives. However, existing commercial battery technologies, which use liquid electrolytes and carbonaceous anodes, have certain drawbacks such as safety concerns, limited lifespan, and inadequate power density particularly at high temperatures.
Published Researchers develop new method for achieving controllable tuning and assessing instability in 2D materials for engineering applications
(via sciencedaily.com) Original source Two-dimensional (2D) materials have atomic-level thickness and excellent mechanical and physical properties, with broad application prospects in fields such as semiconductors, flexible devices, and composite materials.
Published Organs on demand? Scientists print voxel building blocks
(via sciencedaily.com) Original source Scientists are bioprinting 3D structures with a material that is a close match for human tissue, paving the way for true biomanufacturing.
Published Waste Styrofoam can now be converted into polymers for electronics
(via sciencedaily.com) Original source A new study describes a chemical reaction that can convert Styrofoam into a high-value conducting polymer known as PEDOT:PSS. Researchers also noted that the upgraded plastic waste can be successfully incorporated into functional electronic devices, including silicon-based hybrid solar cells and organic electrochemical transistors.
Published Shining light on amyloid architecture
(via sciencedaily.com) Original source Researchers use microscopy to chart amyloid beta's underlying structure and yield insight into neurodegenerative disease.