Showing 20 articles starting at article 641
< Previous 20 articles Next 20 articles >
Categories: Energy: Technology, Physics: General
Published Potential for 110% electricity increases in U. S. urban buildings



A research study tackled the critical issue of how city-scale building energy consumption in urban environments will evolve under the influence of climate change.
Published As surging threats teeter electrical power grids, scientists offer insights to make them more resilient



Power grids -- the web of electrical networks that sprawl across countries and continents -- are under stress. Extreme weather events and volatile energy demands often push the system to the brink. Although these high-impact events can be very damaging, often overlooked is the impact of minor disruptions that trigger a domino effect throughout the system, according to a study analyzing European power blackouts. The findings showed that recovering power within 13 hours can reduce up to 52% of the power loss stemming from cascading events.
Published From a five-layer graphene sandwich, a rare electronic state emerges



When stacked in five layers in a rhombohedral pattern, graphene takes on a rare 'multiferroic' state, exhibiting both unconventional magnetism and an exotic electronic behavior known as ferro-valleytricity.
Published Physicists create new form of antenna for radio waves



Physicists have used a small glass bulb containing an atomic vapor to demonstrate a new form of antenna for radio waves. The bulb was 'wired up' with laser beams and could therefore be placed far from any receiver electronics.
Published World may have crossed solar power 'tipping point'



The world may have crossed a 'tipping point' that will inevitably make solar power our main source of energy, new research suggests.
Published Decontamination method zaps pollutants from soil



A rapid, high-heat electrothermal soil remediation process flushes out both organic pollutants and heavy metals in seconds without damaging soil fertility.
Published Harnessing molecular power: Electricity generation on the nanoscale



Researchers tested a molecular energy harvesting device that captures the energy from the natural motion of molecules in a liquid. Their work showed molecular motion can be used to generate a stable electric current. To create the device, they submerged nanoarrays of piezoelectric material in liquid, allowing the movement of the liquid to move the strands like seaweed waving in the ocean, except in this case the movement is on the molecular scale, and the strands are made of zinc oxide. When the zinc oxide material waves, bends, or deforms under motion, it generates electric potential.
Published Neutrons see stress in 3D-printed parts, advancing additive manufacturing



Using neutrons to see the additive manufacturing process at the atomic level, scientists have shown that they can measure strain in a material as it evolves and track how atoms move in response to stress.
Published Solar design would harness 40% of the sun's heat to produce clean hydrogen fuel



Engineers have designed a system that can efficiently produce 'solar thermochemical hydrogen.' It harnesses the sun's heat to split water and generate hydrogen -- a clean fuel that emits no greenhouse gas emissions.
Published Photonic crystals bend light as though it were under the influence of gravity



Scientists have theoretically predicted that light can be bent under pseudogravity. A recent study by researchers using photonic crystals has demonstrated this phenomenon. This breakthrough has significant implications for optics, materials science, and the development of 6G communications.
Published An electrical switch to control chemical reactions



New pharmaceuticals, cleaner fuels, biodegradable plastics: in order to meet society's needs, chemists have to develop new synthesis methods to obtain new products that do not exist in their natural state. A research group has discovered how to use an external electric field to control and accelerate a chemical reaction, like a 'switch'. This work could have a considerable impact on the development of new molecules, enabling not only more environmentally friendly synthesis, but also very simple external control of a chemical reaction.
Published Simulations of 'backwards time travel' can improve scientific experiments



Physicists have shown that simulating models of hypothetical time travel can solve experimental problems that appear impossible to solve using standard physics.
Published The fuel economy of a microswimmer



The amount of power a microswimmer needs to move can now be determined more easily. Scientists developed a general theorem to calculate the minimal energy required for propulsion. These insights allow a profound understanding for practical applications, such as targeted transport of molecules and substrates.
Published Surprising discovery shows electron beam radiation can repair nanostructures



In a surprising new study, researchers have found that the electron beam radiation that they previously thought degraded crystals can actually repair cracks in these nanostructures. The groundbreaking discovery provides a new pathway to create more perfect crystal nanostructures, a process that is critical to improving the efficiency and cost-effectiveness of materials that are used in virtually all electronic devices we use every day.
Published Widely tuneable terahertz lasers boost photo-induced superconductivity in K3C60



Researchers have long been exploring the effect of using tailored laser drives to manipulate the properties of quantum materials away from equilibrium. One of the most striking demonstrations of these physics has been in unconventional superconductors, where signatures of enhanced electronic coherences and super-transport have been documented in the resulting non-equilibrium states. However, these phenomena have not yet been systematically studied or optimized, primarily due to the complexity of the experiments. Technological applications are therefore still far removed from reality. In a recent experiment, this same group of researchers discovered a far more efficient way to create a previously observed metastable, superconducting-like state in K3C60 using laser light.
Published Revolutionizing energy storage: Metal nanoclusters for stable lithium--sulfur batteries



Lithium–sulfur batteries (LSBs) offer a higher energy storage potential. However, issues like formation of lithium polysulfides and lithium dendrites lead to capacity loss and raise safety concerns. Now, researchers have developed a graphene separator embedded with platinum-doped gold nanoclusters, which enhance lithium-ion transport and facilitate redox reactions. This breakthrough addresses the long-standing issues associated with LSBs, setting the stage for their commercialization.
Published Scientists discover 'flipping' layers in heterostructures to cause changes in their properties



Transition metal dichalcogenide (TMD) semiconductors are special materials that have long fascinated researchers with their unique properties. For one, they are flat, one-atom-thick two-dimensional (2D) materials similar to that of graphene. They are compounds that contain different combinations of the transition metal group (e.g., molybdenum, tungsten) and chalcogen elements (e.g., sulfur, selenium, tellurium).
Published Bringing out the color in zinc



Researchers have synthesized a zinc complex based on two zinc centers that absorbs visible light. They demonstrated that this capability depends on the proximity of the zinc ions, where the complex responds to visible light when the zinc atoms are closer. This new property is expected to expand the utility of zinc, which already offers advantages including biological relevance, cost effectiveness, and low toxicity.
Published Magnetoelectric material can reconnect severed nerves



Neuroengineers designed the first self-rectifying magnetoelectric material and showed it can not only precisely stimulate neurons remotely but also reconnect a broken sciatic nerve in a rat model.
Published X-rays reveal microstructural fingerprints of 3D-printed alloy



Researchers took a novel approach to explore the way microstructure emerges in a 3D-printed metal alloy: They bombarded it with X-rays while the material was being printed.