Showing 20 articles starting at article 161
< Previous 20 articles Next 20 articles >
Categories: Chemistry: Thermodynamics, Mathematics: Puzzles
Published Fusion model hot off the wall


Heat load mitigation is critical to extending the lifetime of future fusion device. Researchers have found a way to explain the rotational temperatures measured in three different experimental fusion devices in Japan and the United States. Their model evaluates the surface interactions and electron-proton collisions of hydrogen molecules.
Published Novel thermal sensor could help drive down the heat


Excess heat from electronic or mechanical devices is a sign or cause of inefficient performance. In many cases, embedded sensors to monitor the flow of heat could help engineers alter device behavior or designs to improve their efficiency. For the first time, researchers exploit a novel thermoelectric phenomenon to build a thin sensor that can visualize heat flow in real time. The sensor could be built deep inside devices where other kinds of sensors are impractical. It is also quick, cheap and easy to manufacture using well-established methods.
Published Catalyst can control methane emissions in natural gas engines


A catalyst using a single or just a few palladium atoms removed 90% of unburned methane from natural gas engine exhaust at low temperatures in a recent study. While more research needs to be done, the advance in single atom catalysis has the potential to lower exhaust emissions of methane, one of the worst greenhouse gases that traps heat at about 25 times the rate of carbon dioxide. Researchers showed that the single-atom catalyst was able to remove methane from engine exhaust at lower temperatures, less than 350 degrees Celsius (662 degrees Fahrenheit), while maintaining reaction stability at higher temperatures.
Published A non-covalent bonding experience


Putting a suite of new materials synthesis and characterization methods to the test, a team of scientists has developed 14 organic-inorganic hybrid materials, seven of which are entirely new.
Published Droplet levitation is a new way to explore airborne viruses and microorganisms


Researchers report achieving self-sustaining and long-term levitation of millimeter-sized droplets of several different liquids without any external forces. To get the droplets to levitate, they use solutocapillary convection, which occurs when a surface tension gradient is formed by nonuniform distribution of vapor molecules from the droplet at the pool surface. Further exploring the effects of various external conditions on self-sustained droplet levitation will reveal whether it can be harnessed and adapted for microbiology and biochemistry applications.
Published Small-winged and lighter colored butterflies likely to be at greatest threat from climate change


Small-winged and lighter colored butterflies likely to be at greatest threat from climate change. The family, wing length and wing colour of tropical butterflies all influence their ability to withstand rising temperatures, say ecologists. The researchers believe this could help identify species whose survival is under threat from climate change.
Published Thermal cloak passively keeps electric vehicles cool in the summer and warm in the winter


When an electric vehicle is parked outside, its temperature can swing wildly from day to night and season to season, which can lead to deterioration of the battery. To dampen these fluctuations and extend the battery's lifespan, researchers have designed an all-season thermal cloak that can cool an electric vehicle by 8°C on a hot day and warm it by 6.8°C at night. The cloak, made predominantly of silica and aluminum, can do so passively without outside energy input and operates without any modification between hot or cold weather.
Published The ground is deforming, and buildings aren't ready


A new study has linked underground climate change to the shifting ground beneath urban areas. The phenomenon is affecting all major urban areas around the globe, causing civil structures and infrastructures to crack.
Published Board games are boosting math ability in young children


Board games based on numbers, like Monopoly, Othello and Chutes and Ladders, make young children better at math, according to a comprehensive review of research published on the topic over the last 23 years.
Published Sweat it out: Novel wearable biosensor for monitoring sweat electrolytes for use in healthcare and sports


Wearable sensors are becoming a promising tool in personalized healthcare and exercise monitoring. In a recent study, researchers develop a novel wearable chemical sensor capable of measuring the concentration of chloride ions in sweat. By using a heat-transfer printing technique, the proposed sensor can be applied to the outer surface of common textiles to prevent skin irritation and allergies, and could also be useful in the early detection of heat stroke and dehydration.
Published Climate-friendly air conditioning inspired by termites


The climate control used by termites in their mounds could inspire tomorrow's climate-smart buildings. New research shows that future buildings inspired by the termites could achieve the same effect as traditional climate control, but with greater energy efficiency and without its carbon dioxide footprint.
Published Researchers create highly conductive metallic gel for 3D printing


Researchers have developed a metallic gel that is highly electrically conductive and can be used to print three-dimensional (3D) solid objects at room temperature.
Published Scientists designed new enzyme using Antarctic bacteria and computer calculations


For the first time, researchers have succeeded in predicting how to change the optimum temperature of an enzyme using large computer calculations. A cold-adapted enzyme from an Antarctic bacterium was used as a basis.
Published Soft, ultrathin photonic material cools down wearable electronic devices



Overheating of wearable skin-like electronic devices increases the risk of skin burning and results in performance degradation. A research team has now invented a photonic material-based 'soft, ultrathin, radiative-cooling interface' that greatly enhances heat dissipation in devices, with temperature drops more than 56°C, offering an alternative for effective thermal management in advanced wearable electronics.
Published Squid-inspired soft material is a switchable shield for light, heat, microwaves



With a flick of a switch, current technologies allow you to quickly change materials from being dark to light, or cold to hot, just by blocking or transmitting specific wavelengths. But now, inspired by squid skin, researchers report a soft film that can regulate its transparency across a large range of wavelengths -- visible, infrared and microwave -- simultaneously. They demonstrated the material in smart windows and in health monitoring and temperature management applications.
Published How the brain processes numbers -- New procedure improves measurement of human brain activity



Measuring human brain activity down to the cellular level: until now, this has been possible only to a limited extent. With a new approach it will now be much easier. The method relies on microelectrodes along with the support of brain tumor patients, who participate in studies while undergoing 'awake' brain surgery. This enabled the team to identify how our brain processes numbers.
Published Mathematicians solve long-known problem



Making history with 42 digits: Scientists have unlocked a decades-old mystery of mathematics with the so-called ninth Dedekind number. Experts worldwide have been searching for the value since 1991. Scientists arrived at the exact sequence of numbers with the help of the Noctua supercomputer.
Published Inside-out heating and ambient wind could make direct air capture cheaper and more efficient



Chemical engineers use coated carbon fibers and eliminate steam-based heating in their simpler design, which also can be powered by wind energy.
Published Energy harvesting via vibrations: Researchers develop highly durable and efficient device



An international research group has engineered a new energy-generating device by combining piezoelectric composites with carbon fiber-reinforced polymer (CFRP), a commonly used material that is both light and strong. The new device transforms vibrations from the surrounding environment into electricity, providing an efficient and reliable means for self-powered sensors.
Published Sustainable technique to manufacture chemicals



A newly published study details a novel mechanochemistry method that can produce chemicals using less energy and without the use of solvents that produce toxic waste.